<?xml version="1.0"?>
<Articles JournalTitle="Frontiers in Dentistry">
  <Article>
    <Journal>
      <PublisherName>Tehran University of Medical Sciences</PublisherName>
      <JournalTitle>Frontiers in Dentistry</JournalTitle>
      <Issn>2676-296X</Issn>
      <Volume>11</Volume>
      <Issue>6</Issue>
      <PubDate PubStatus="epublish">
        <Year>2014</Year>
        <Month>12</Month>
        <Day>15</Day>
      </PubDate>
    </Journal>
    <title locale="en_US">Effect of Self-etching Adhesives on the Bond Strength of Glass-Ionomer Cements.</title>
    <FirstPage>680</FirstPage>
    <LastPage>6</LastPage>
    <AuthorList>
      <Author>
        <FirstName>Zahra</FirstName>
        <LastName>Jaberi Ansari</LastName>
        <affiliation locale="en_US">Associate professor, Department of Operative Dentistry, Dental School, Shahid Beheshti University of Medical Sciences, Tehran, Iran.</affiliation>
      </Author>
      <Author>
        <FirstName>Narges</FirstName>
        <LastName>Panahandeh</LastName>
        <affiliation locale="en_US">Assistant Professor, Department of Operative Dentistry, Dental School, Shahid Beheshti University of Medical Science, Tehran, Iran.</affiliation>
      </Author>
      <Author>
        <FirstName>Zahra Sadat</FirstName>
        <LastName>Tabatabaei Shafiei</LastName>
        <affiliation locale="en_US">Dentist, Department of Basic Sciences, Faculty of Rehabilitation Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran.</affiliation>
      </Author>
      <Author>
        <FirstName>Alireza</FirstName>
        <LastName>Akbarzadeh Baghban</LastName>
        <affiliation locale="en_US">Associate Professor, Department of Basic Sciences, Faculty of Rehabilitation Sciences, Shahid Beheshti University of Medical Sciences, Tehran, Iran.</affiliation>
      </Author>
    </AuthorList>
    <History>
      <PubDate PubStatus="received">
        <Year>2015</Year>
        <Month>10</Month>
        <Day>16</Day>
      </PubDate>
    </History>
    <abstract locale="en_US">Adequate bond strength between glass ionomer cements and composite resin is necessary for the success of the sandwich technique.This study assessed the micro-shear bond strength of composite resin to glass-ionomer cements (GIC) using self-etch adhesives with different pH values.One hundred specimens (6&#xD7;4&#xD7;2 mm) were made using Fuji II and Fuji II LC GICs and treated with different adhesives as follows: Group 1:Fuji II+ Adper Prompt L-Pop, Group-2: Fuji II+SE bond, Group-3: Fuji II + AdheSE, Group-4:Fuji II+ Protect bond, Group-5: Fuji II + Single bond, Group-6:Fuji II LC+ Adper Prompt LPop, Group-7: Fuji II LC+SE bond, Group-8:Fuji II LC+ AdheSE, Group-9: Fuji II LC+ Protect bond, and Group-10: Fuji II LC+ Single bond. Each group consisted of 10 specimens. A cylinder of Z100 composite resin was placed on each sample and light cured. After 24 hours of water storage (37&#xB0;C), the specimens were subjected to micro-shear bond strength tests (0.5 mm/min). Data were analyzed using two-way ANOVA and Tukey's test.The mean micro-shear bond strength of groups 1-10 was 11.66&#xB1;1.79, 16.50&#xB1;1.85, 18.47&#xB1;1.77, 13.95&#xB1;1.77, 15.27&#xB1;1.49, 15.14&#xB1;0.90, 20.03&#xB1;1.19, 17.48&#xB1;3.00, 16.24&#xB1;1.98 and 16.03&#xB1;1.49 MPa, respectively. There were significant differences between groups 1 and 7 (P0.05). Fuji II LC showed higher bond strength than Fuji II (P</abstract>
    <web_url>https://fid.tums.ac.ir/index.php/fid/article/view/397</web_url>
    <pdf_url>https://fid.tums.ac.ir/index.php/fid/article/download/397/373</pdf_url>
  </Article>
</Articles>
